Skip to product information
Home / DAQ & Sensors / Voltage Sensor / FrSky FLVS ADV 2S-8S LiPo Voltage Sensor with OLED Display

FrSky FLVS ADV 2S-8S LiPo Voltage Sensor with OLED Display

Lead Time
FrSky FLVS ADV voltage sensor with screen

Product Description

FrSky FLVS ADV 2S-8S LiPo Voltage Sensor with OLED Display is designed for the sensing and monitoring work identified in its specifications. It gives a compatible controller or monitoring system access to the quantities this model is designed to measure. Interface support is listed as FBUS / S.Port. The Power Consumption specification is Approx. 10mA. The Measurement Range specification is 2S-8S. When choosing this lipo voltage sensor, start with the documented configuration.

The measurement range and signal output should suit the job before you choose a sensor. Supply, mounting and environmental limits are separate checks; any stated calibration or handling requirements also remain relevant. The Display Resolution specification is 0.01V. The Operating Temperature specification is -20°C to 60°C. The specifications below bring the electrical, mechanical and operating details together so you can compare this version with the requirements of the intended equipment.

Product Specifications

BrandFrSky
ModelFLVS ADV
Product TypeLiPo Voltage Sensor
Measurement Range2S-8S
Display Resolution0.01V
InterfaceFBUS / S.Port
Power ConsumptionApprox. 10mA
Operating Temperature-20°C to 60°C

Product Features

  1. Model: FrSky FLVS ADV
  2. Measurement range: 2S-8S LiPo
  3. Display: OLED screen
  4. Voltage display resolution: 0.01V
  5. Telemetry protocols: FBUS / S.Port
  6. S.Port power consumption: approx. 10mA @ 5V
  7. Battery-side power consumption: approx. 10mA
  8. Operating temperature: -20°C to 60°C

Package Includes

  • 1 × FrSky FLVS ADV Voltage Sensor

Frequently Asked Questions

What is the FrSky FLVS ADV 2S-8S LiPo Voltage Sensor with OLED Display used for?
The FrSky FLVS ADV is a finished voltage-monitoring sensor designed for 2S to 8S LiPo battery packs. It combines an OLED display with FrSky telemetry support for convenient real-time battery voltage monitoring.
What are its main features?
Finished LiPo voltage sensor: Designed for complete 2S-8S battery monitoring.; OLED display: On-device voltage display with 0.01V resolution.; FBUS and S.Port: Compatible with FrSky telemetry systems.; Low power consumption: Approximately 10mA during operation.
What are the power or battery requirements?
Power Consumption: Approx. 10mA. Match the supply or charger to these specifications before connecting the product.
Which interfaces or communication protocols does it use?
Interface: FBUS / S.Port. Check that your host, gateway or controller supports the listed interface and required configuration.
What is included in the package?
1 × FrSky FLVS ADV Voltage Sensor.

Other Information

Correct cell sequence and polarity are required when wiring the sensor to the LiPo balance connection. Before installation, check compatibility with the receiver telemetry protocol.

Warranty Information

15 Days Seller Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of TwoElectrons customers from any kind of manufacturing defects. Replacement will be done against manufacturing defects.

What Voids Warranty

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Shipping & Returns Policy

Shipping Policy:
  • In-stock items are delivered within 7-10 working days for orders within India. Delivery varies based on location and courier service.
  • In-stock items are delivered within up to 20 working days for orders outside India. Delivery varies based on location and courier service.
  • If the item is out of stock, you can still place an order. The estimated delivery time will be notified to you by email.
Return & Refund Policy:
  • Return window: 7 days from receipt unless stated otherwise.
  • No refunds or replacements after the return window.
  • Returns are accepted only for non-working or damaged products.
  • Initiate return requests from here: Return Request or contact us at 09831070550.
  • Refunds are processed within 3-4 working days after inspection and approval.

Main Features

  • Product Type: The Product Type specification is LiPo Voltage Sensor.
  • Compatible connection: Interface support is listed as FBUS / S.Port.
  • Measurement Range: The Measurement Range specification is 2S-8S.
  • Power Consumption: The Power Consumption specification is Approx. 10mA.
  • Measurement detail: The Display Resolution specification is 0.01V.
SKU: 2ESE20053
₹ 3,199.00
For bulk orders, volume pricing & B2B enquiries, contact our team →

Lead time

Item is currently out of stock, but you can still place an order. Estimated delivery time will be notified to you by email.
Icon
Need Support?
Click here
Icon
Free delivery above ₹5,000
Icon
1 year product warranty
Icon
Secure payment options
Protections for this product
Delivery
Delivery via TwoElectrons Logistics

We aim to deliver your order within the scheduled dates, but delays may occur due to unforeseen circumstances.

Security
Secure Payments

Your payment information is safe with us. TwoElectrons.com uses SSL encryption to ensure secure and reliable transactions.

Security
Standard Refund Policy

You're covered! If your order doesn't ship, arrives incomplete, or has any product issues, you can claim a full refund.