Skip to product information
Home / Makers Kit / Software & Debugger Tools / Debuggers & Emulators / ST Link V2 Programmer for STM8 and STM32

ST Link V2 Programmer for STM8 and STM32

No reviews yet
Expert Consultation
Book now → Remote Configuration
Get support → Onsite Deployment
Send email → Knowledge Video
Send email →
Lead Time
ST Link V2 Programmer for STM8 and STM32
  • ST Link V2 Programmer for STM8 and STM32

Product Description

ST Link V2 Programmer for STM8 and STM32 is designed for the programming, debugging or serial-development functions stated below. It suits developers working with the target platforms and interfaces identified for this particular tool. STM8 Interface support is listed as SWIM. STM32 Interface support is listed as SWD. The Target Power Output specification is 3.3V / 5V. When choosing this programmer / debugger, start with the documented configuration.

Key highlights:Check target support, the host software and the connection arrangement together. Programming and debugging are distinct functions, and any target-voltage or setup limits still apply when connecting the tool to a board. The Target Families specification is STM8, STM32. The USB Protection specification is 500mA resettable fuse. The SWIM Programming Speed specification is Approx. 9.7KB/s low speed; 12.8KB/s high speed. The Connector Pitch specification is 2.54mm class target connection.

Product Specifications

Product TypeProgrammer / Debugger
Target FamiliesSTM8, STM32
STM8 InterfaceSWIM
STM32 InterfaceSWD
Target Power Output3.3V / 5V
USB Protection500mA resettable fuse
SWIM Programming SpeedApprox. 9.7KB/s low speed; 12.8KB/s high speed
Connector Pitch2.54mm class target connection

Product Features

  1. STM8 and STM32 Development
    Use this version for programming and in-circuit debugging of common STM8 and STM32 targets.
  2. Dual Target Voltage
    both 3.3V and 5V outputs for convenient target-board connection is provided by the unit.
  3. Protected USB Interface
    Operation is based on a 500mA resettable fuse to help protect the host USB port.
  4. Clearly Marked Connections
    Interface definitions are printed on the enclosure for prompt bench use.

Package Includes

  • 1 × ST Link V2 Programmer for STM8 and STM32

Frequently Asked Questions

What is the ST Link V2 Programmer for STM8 and STM32 used for?
Compact USB in-circuit programmer and debugger for STM8 and STM32 microcontrollers. Supports STM32 SWD and STM8 SWIM programming/debugging with 3.3V and 5V target power outputs.
What are its main features?
Programming and debugging support for STM8 and STM32 microcontrollers; SWIM interface for STM8 and SWD interface for STM32; 3.3V and 5V target power outputs; 500mA resettable fuse for USB-side protection.
What are the power or battery requirements?
Target Power Output: 3.3V / 5V. Match the supply or charger to these specifications before connecting the product.
Which interfaces or communication protocols does it use?
STM8 Interface: SWIM; STM32 Interface: SWD. Check that your host, gateway or controller supports the listed interface and required configuration.
What is included in the package?
1 × ST Link V2 Programmer for STM8 and STM32.

Other Information

Suggested Uses
  • STM8 firmware programming and debugging
  • STM32 SWD programming and development
  • Embedded prototyping and service work
Delivery and Returns

Orders follow the TwoElectrons delivery and return terms published on this website.

Warranty Information

15 Days Seller Warranty

This item is covered with a standard warranty of 15 days from the time of delivery against manufacturing defects only. This warranty is given for the benefit of TwoElectrons customers from any kind of manufacturing defects. Replacement will be done against manufacturing defects.

What Voids Warranty

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Shipping & Returns Policy

Shipping Policy:
  • In-stock items are delivered within 7-10 working days for orders within India. Delivery varies based on location and courier service.
  • In-stock items are delivered within up to 20 working days for orders outside India. Delivery varies based on location and courier service.
  • If the item is out of stock, you can still place an order. The estimated delivery time will be notified to you by email.
Return & Refund Policy:
  • Return window: 7 days from receipt unless stated otherwise.
  • No refunds or replacements after the return window.
  • Returns are accepted only for non-working or damaged products.
  • Initiate return requests from here: Return Request or contact us at 09831070550.
  • Refunds are processed within 3-4 working days after inspection and approval.
ST Link V2 Programmer for STM8 and STM32

Main Features

  • The Product Type specification is Programmer / Debugger.
  • STM8 Interface support is listed as SWIM.
  • STM32 Interface support is listed as SWD.
  • The Target Power Output specification is 3.3V / 5V.
  • The Target Families specification is STM8, STM32.
SKU: 2EMK2060
₹ 164.00
Maximum purchase quantity 3 per order. Bulk orders or B2B inquiries?   Email us →

Lead time

Item is currently out of stock, but you can still place an order. Estimated delivery time will be notified to you by email.
Icon
Need Support?
Click here
Icon
Free delivery above ₹5,000
Icon
1 year product warranty
Icon
Secure payment options
Protections for this product
Delivery
Delivery via TwoElectrons Logistics

We aim to deliver your order within the scheduled dates, but delays may occur due to unforeseen circumstances.

Security
Secure Payments

Your payment information is safe with us. TwoElectrons.com uses SSL encryption to ensure secure and reliable transactions.

Security
Standard Refund Policy

You're covered! If your order doesn't ship, arrives incomplete, or has any product issues, you can claim a full refund.

TwoElectrons.com protects all your orders placed and paid on the platform with secure Razorpay Payment Gateway.