Skip to product information
Home / Makers Kit / Custom Development / VVM001 - 200A Current Sensor Module AC DC with Over-Current Detection

VVM001 - 200A Current Sensor Module AC DC with Over-Current Detection

No reviews yet
Expert Consultation
Book now → Remote Configuration
Get support → Onsite Deployment
Send email → Knowledge Video
Send email →
Low Stock, 1 left
VVM001 AC DC Hall effect current sensor module with adjustable over-current detection
  • VVM001 AC DC Hall effect current sensor module with adjustable over-current detection

Product Description

The VVM001 is a Hall effect current sensor module for AC and DC current measurement in industrial and commercial systems. A conductor passes through its 9.0 mm sensing aperture, allowing current monitoring without an electrical connection to the measured conductor.

The module measures up to ±200 A DC or 150 A RMS AC and provides a proportional analog voltage output with 11 mV/A sensitivity at a 5 V supply. An adjustable preset sets the positive-current over-current threshold, with a dedicated active-low digital output and red status LED.

Applications

Motor Control Solar & Power Systems Battery Charging & Electric Vehicles

Product Specifications

ModelVVM001
Versionv1.1
Sensing principleHall effect
DC current range±200 A
AC current range150 A RMS
Supply voltage5 V DC
Sensitivity11 mV/A at 5 V supply
Zero-current output reference2.5 V (from datasheet equation)
Current calculationI (A) = (Vout − 2.5) / 0.011
Conductor aperture9.0 mm diameter
Board dimensions49 × 30 mm
Electrical isolation4000 V
Bandwidth>20 kHz
Magnetic hysteresisNearly zero
Analog outputVoltage proportional to current
Digital outputo/c: LOW on over-current; HIGH otherwise
Threshold adjustmentPreset; clockwise increases threshold, anticlockwise decreases threshold
Threshold limitationOver-current threshold cannot be set for negative current
IndicatorsGreen: power; red: over-current
Connections+5v, gnd, out, o/c

Product Features

  1. Hall effect sensing for AC and DC current
  2. DC measurement range: ±200 A; AC range: 150 A RMS
  3. 11 mV/A sensitivity at 5 V supply
  4. 9.0 mm conductor aperture
  5. Adjustable positive-current over-current threshold
  6. Active-low over-current digital output
  7. Power and over-current LED indicators
  8. 4000 V electrical isolation; bandwidth >20 kHz
  9. Pass the measured conductor through the sensing aperture.
  10. Connect out to an external voltage measurement or ADC circuit.
  11. Adjust the preset locally to set the desired positive-current trip level.

Package Includes

  • 1 × VVM001 current sensor module
  • Additional accessories are not specified in the supplied datasheet.

Frequently Asked Questions

Can the VVM001 measure both AC and DC current?
Yes. It supports DC current measurement up to ±200 A and AC current measurement up to 150 A RMS using Hall effect sensing.
What power supply and output does the module use?
Use a 5 V DC supply. The analog output sensitivity is 11 mV/A, with a 2.5 V zero-current reference. Current in amperes = (Vout − 2.5) / 0.011.
How is the over-current threshold adjusted?
Adjust the onboard preset clockwise to increase the threshold or anticlockwise to decrease it. The o/c pin goes LOW and the red LED lights during over-current. A negative-current threshold cannot be set.
What conductor size and board dimensions are supported?
The sensing aperture is 9.0 mm in diameter. The board measures 49 × 30 mm. The datasheet specifies 4000 V electrical isolation and bandwidth greater than 20 kHz.
Does the VVM001 have wireless or remote configuration?
No wireless interface or built-in remote configuration is specified. Current is read through the analog output and the trip threshold is adjusted locally. The Remote Configuration Support field refers to seller support availability.

Other Information

Applications: motor control, power systems, solar systems, battery chargers, electric vehicles, load detection and over-current fault detection.

Connection: +5v supplies the module; gnd is supply ground; out is the proportional analog output; o/c is the active-low over-current output. Adjust the preset clockwise to increase the threshold and anticlockwise to decrease it. Negative-current over-current thresholds are not supported. The module has analog and digital outputs, rather than analog or digital inputs. No wired data bus or wireless interface is specified. Remote-support availability refers to seller support; the module threshold is adjusted locally.

Warranty Information

1 Year Seller Warranty

This item is covered with a standard warranty of 1 year from the time of delivery against manufacturing defects only. This warranty is given for the benefit of TwoElectrons customers from any kind of manufacturing defects. Replacement will be done against manufacturing defects.

What Voids Warranty

If the product is subject to misuse, tampering, static discharge, accident, water or fire damage, use of chemicals & soldered or altered in any way.

Shipping & Returns Policy

Shipping Policy:
  • In-stock items are delivered within 7-10 working days for orders within India. Delivery varies based on location and courier service.
  • In-stock items are delivered within up to 20 working days for orders outside India. Delivery varies based on location and courier service.
  • If the item is out of stock, you can still place an order. The estimated delivery time will be notified to you by email.
Return & Refund Policy:
  • Return window: 7 days from receipt unless stated otherwise.
  • No refunds or replacements after the return window.
  • Returns are accepted only for non-working or damaged products.
  • Initiate return requests from here: Return Request or contact us at 09831070550.
  • Refunds are processed within 3-4 working days after inspection and approval.
VVM001 - 200A Current Sensor Module AC DC with Over-Current Detection

Main Features

  • Hall effect sensing for AC and DC current
  • DC measurement range: ±200 A; AC range: 150 A RMS
  • 11 mV/A sensitivity at 5 V supply
  • 9.0 mm conductor aperture
  • Adjustable positive-current over-current threshold
  • Active-low over-current digital output
  • Power and over-current LED indicators
  • 4000 V electrical isolation; bandwidth >20 kHz
SKU: 2EMK30001
₹ 1,122.00
For bulk orders, volume pricing & B2B enquiries, contact our team →

Lead time

QUANTITY DISPATCH
1-10 units Order from India: 7-10 working days
Order outside India: Up to 20 working days
10+ units To be negotiated
Icon
Need Support?
Click here
Icon
Free delivery above ₹5,000
Icon
1 year product warranty
Icon
Secure payment options
Protections for this product
Delivery
Delivery via TwoElectrons Logistics

We aim to deliver your order within the scheduled dates, but delays may occur due to unforeseen circumstances.

Security
Secure Payments

Your payment information is safe with us. TwoElectrons.com uses SSL encryption to ensure secure and reliable transactions.

Security
Standard Refund Policy

You're covered! If your order doesn't ship, arrives incomplete, or has any product issues, you can claim a full refund.

TwoElectrons.com protects all your orders placed and paid on the platform with secure Razorpay Payment Gateway.